Inkbird INK-VS03 Vacuum Sealer Review
In short: the Inkbird INK-VS03 is a budget vacuum sealer (around NIS 200-300) with good build quality, dry, moist and pulse modes, roll storage and a cutter. It works well in dry mode, but moist mode is oversensitive, so for liquids I use pulse mode.
Inkbird released a new model of their vacuum sealer, the INKBIRD INK-VS03, with a price tag of around NIS 200, which made me buy it and check whether it really delivers all the features the company advertises, especially at such a low price for a vacuum sealer.
Inkbird INK-VS03 specifications

First impressions
The device comes in a very basic gray box without much marketing on it.
When you take the vacuum sealer out of the box, you get a device with good build quality and a partly stainless steel finish, and it feels like a well-built vacuum sealer.

At first glance, it looks like this vacuum sealer has more buttons, which could point to extra features, but it's simply a different (and slightly confusing) button layout - for example, the moist/dry mode button was split into a vacuum & seal button for dry mode and a vacuum & seal button for moist mode.
When comparing the VS03 model to its predecessor side by side, you can see the difference in appearance, while the two machines are similar in size and structure.

How to use the Inkbird INK-VS03
When you plug the vacuum sealer in, the window lights up and you can see the chamber.
The buttons, from left to right:
A timer showing the time left until the vacuum or sealing is done
Vacuum & seal button for dry mode
Vacuum & seal button for moist mode
Seal button
Pulse button
A button that stops the vacuum and sealing.
The machine closes by pressing down on the lid and opens by pressing the two buttons on its sides.

When you open the machine, you can see the sealing strip and the oval area where you place the bag to vacuum and seal it.
On the right side, there's the port for the accessory hose used for jars.

Built-in roll storage and cutter.
Here you can see that the timer shows how long the process takes and when it should end.
Seal one end, cut, and you get a bag at the length you need.
The first test is vacuuming a canister.

Next is a bag of broccoli and olive oil in dry mode.

The next bag is chicken breast in teriyaki sauce, and here we'll use moist mode - you can immediately see that the vacuum is more sensitive and therefore shorter, and the timer is 10 seconds longer than in dry mode, in order to create an effective seal in case there's liquid in the sealing area.

The next bag is corn with salt, butter and rosemary, vacuumed in dry mode.

When I vacuum fish, I use pulse mode so I don't put too much pressure on the delicate fish and keep it intact, and that's what we'll do here - this mode also helps when working with liquids, stopping the suction before the liquid gets into the machine. As long as you hold the pulse button, the machine keeps vacuuming.

The last bag is also the most challenging one, as it has quite a lot of liquid in it.
Here I ran into a bit of a problem, as the suction stopped too early... maybe because the bag area is relatively narrow and requires placing the bag precisely.
After playing around with the position (harder with a wide bag) and using pulse mode, the bag was vacuumed successfully.

Inkbird INK-VS03 review: after a month of use
After a month of using the vacuum sealer, I can say it gives you value for the money, especially for a vacuum sealer that costs NIS 200 to 300.
The Inkbird VS03 vacuum sealer has good build quality with a stainless steel finish and offers a variety of features at a competitive price compared to similar machines on the market today.
In dry mode, it delivers and vacuums the bags well.
For the casual user who's just starting out with sous vide, this machine will probably give them their money's worth.

The problems start with moist mode, which is oversensitive and sometimes cuts the vacuum short without removing all the air.
Sometimes it took me 5 tries just to vacuum a bag properly, while playing with the exact position of the bag in the machine, or simply switching to pulse mode, where you can control the suction manually.
Another important thing to note is that the sealing bar keeps working when the device is open, meaning that if you started vacuum & seal, make sure to press the stop button, otherwise you can get burned if you touch the sealing area - it sounds like a very rare case, but it even happened to me.
Still, even with these drawbacks, anyone looking for a cheap vacuum sealer with features like moist mode, pulse and even roll storage, or simply a first vacuum sealer, will probably find this machine right for them, especially with a winning price tag compared to Anova and FoodSaver models.
If you're still not sure which vacuum sealer to buy, check out the complete guide to choosing a vacuum sealer, which will help you sort things out in terms of budget, needs and a list of recommended vacuum sealers.



Frequently asked questions
Is the Inkbird INK-VS03 good for sous vide?
Yes, especially for beginners and anyone looking for a cheap first vacuum sealer. It vacuums well in dry mode and has moist and pulse modes for liquids.
What's the difference between the Inkbird VS03 and VS02?
The two machines are similar in size and structure. The main differences are the appearance and the button layout, with separate vacuum & seal buttons for dry and moist mode.
How do I vacuum seal liquids with the VS03?
Use pulse mode: the machine vacuums only while you hold the pulse button, so you can stop before the liquid reaches the machine.
Does the sealing bar get hot when the lid is open?
Yes. The sealing bar keeps working when the lid is open, so if you started vacuum & seal, press the stop button before touching the sealing area.





Comments